武汉西门子PLC代理商触摸屏供应商
6ES7228-1RC52-0AA0
SIMATIC S7-1200,EMS400S, 电源信号放大器 PSB-S, 6xDI,24V DC, 1x DI,24VDC Sync, 3x 母线信号 48V DC
SIMATIC EMS400S PSB-S-module
订货数据
产品信息
组态工具
跳转到
概述
技术规范
概述
EMS400S rail signal booster
The PSB-S (power signal booster segment) module is used forsegment control and establishes the communication between the cartand the segment control.
The module is connected on the right of the S7-1200 as an I/Omodule.
The PSB-S module can operate 3 rail channels. Up to 8 PSB-Smodules can be connected on the right-hand side of the S7-1200CPU.
Other interfaces:
SYNC input
Digital inputs
技术规范
Technical specifications | SIMATIC EMS400S PSB-S module | |
Power supply 1 | ||
Nominal voltage | 24 V DC | |
Power consumption, typical | Approx. 0.1 A | |
Power supply 2 | 48 V DC | Approx. 1.9 A |
SYNC input | ||
Number of inputs | 1 | |
Type | Current-sinking, IEC Type 1 | |
Nominal voltage | 24 V | |
Digital inputs | 6, in a group | |
RAIL interface | ||
Number | 3 | Differential, 48 V AC, non-isolated from P48 V |
Data rate | 16 bits / 250 ms | |
Environmental conditions | ||
Degree of protection | ||
Front/rear | IP20 | |
Ambient temperature | ||
In operation, vertical installation | 0 °C to +45 °C | |
In operation, horizontal installation | 0 °C to +55 °C | |
Relative humidity | 10 % to 95%, without condensation | |
Storage temperature | -40 °C to +70 °C | |
Certificates | CE, cULus | |
Dimensions | ||
Dimensions (W x H x D) in mm | 70 x 100 x 75 | |
Weight | Approx. 230 g |
武汉西门子PLC代理商触摸屏供应商 武汉西门子PLC代理商触摸屏供应商